Tag Archives: snack

2/21/16 – Sunday – Vinyl and Donuts

The last official meet day before Build End or Bag Day, members were on edge to complete their tasks. Business member Anna continued her vinyl work. She was able to finish one side of the Suburban with help from Arvin, another Business member. Other Business member Nicole was too sick to come today, but she worked on the Business Plan Design from home.

Arvin and Anna working on adding vinyl sponsorship logos to a side of the Team’s Suburban.

Jacob of Simulation team worked with his mentor Dr. Stone for the day. They worked mainly in the Cinema room. Jacob was able to finish some formatting and proofreading of his documentation.

There were some snacks brought for the members later into the meeting. Delicious cold pastries, donuts, and brownies were given out. Slightly chilled, these products contained a sweet filling.

Table full of drinks and pastries for the Team.

Lousaper, member of Lathe team, continued to make miscellaneous spacers that could be used in generic places on the Robot. She also assisted in the clean-up in the gym.

Lousaper preparing her Lathe for an operation run.

CAM member James helped CAD member Mikia, Welder Roupen, and Mr. Najarian. Together the trio assembled the Prototype Bumper. James then began to CAM possible the last part he’ll create this year.

James and Mikia cutting out the needed materials.

Mr. Black machined pulleys for the Winch Cable.

The newly machined parts done by Mr. Black.

He then installed chains to the Arm and Winch mechanisms and also CAM programmed the Gearbox Brace.

More freshly machined parts.

The lab closed at 12:55 AM.

2/18/16 – Thursday – Delicious Cake

As usual, Team 696 members attended their meeting. Led by Mika and Mr. Black and Mr. Hoard, members were given deadlines for Ventura money and T-shirt orders.

Team 696 members assembled in their meeting of the day.

Samuel, the Photographer, was busy for the entire day. He was preoccupied with taking picture of individual Robot Parts in the Cinema Room. While these pictures of the newly anodized parts are quite beautiful, this meant he couldn’t take many photos of sub-groups working. We forgive you Samuel, for we know how hard you work for the team.

Lathe member Lousaper has been working on her Lathe for the past two meetings. Both times she made Delrin Standoffs for the Polycarbonate Claw of the Robot.

Lousaper running the Lathe through numerous operations.

Jake from Programming worked with CAD member Claire and Prototyping member Lauren. With the help from those two, Jake learned how to use the Drill Press. Jake then organized batteries and finished the rough draft of all competition battery tests. These will soon be placed into a folder and categorized into a comprehensive graph showing the best batteries.

CAD member Mikia worked on bumper design, bumper mounting, and providing the CAD designs to members working on assembly. Other CAD member Anthony K. worked on fixing the Telescoping Arms and mounting them onto the Practice Robot with the help of Prototype member Devon.

Anthony K. and Devon working on the Telescoping Arms.

Jacob of Simulation continued working on documentation, finishing up the section on the ODE functions.

Welding member Roupen  began to weld the Hanging Mechanism Support Structure. This structure connects the first box-tube in the Hanging Mechanism to the Robot Arm with an 1/8″ plate using bolts. Welding rookie Eden helped Roupen by holding the part during the welding process.

Business team had a busy day. Nicole continued t-shirt Business Plan designs. Anna worked on the actual Business Plan. Andrea continued her hard-work on the button designs, only needing to finish edits on Photoshop.

As it was Nanor’s Birthday, cake was brought for the team. It was quickly eaten during a work-break.

The final picture of the cake before it was torn to pieces and eaten.

Programming member Bhavin worked on revising code that runs the Robot’s Pivoting Arm and Shooter. He also a tried a new configuration for the Robot’s Camera that will allow the Team to quickly test and debug the Vision Processing Program.

James of CAM helped Dustin of CNC Mill. The super-duo created Gearbox Output Shafts out of 7075 aluminum as opposed to the main Robot material – 6061 aluminum.

Dustin of CNC Mill team finished off the Arm Plate Supports by drilling two small holes in each one.

Mika, our Critical President put together the Gearboxes and the Arm. She then worked on wiring everything up.

Mr. Black rebuilt the Manual Mill’s vise. He also assembled three Trampa Wheels and bored out a bushing on the Competition Robot using the Haas Lathe.

The lab closed at around 8:55 PM. With Build End nearing faster than ever, every task is critical to the Team’s success.