Tag Archives: Snack

11/6/15 – Friday – Sundown

It’s that time of season once more, when it gets deathly cold and the sun goes down beyond the horizon much earlier than usual. Despite this, the ever-working members of robotics assembled at the lab on time and ready to work.

Nicole, member of the Business team, was awarded the famed Gold Wrench for her hard work. The room was full of applause for her, as she definitely deserved this gracious award.

_DSC0006
Nicole of Business showing off the Golden Wrench Award.

Prototype team, consisting of Lauren, Karin and Meetkumar this day, continued their work on the flywheel. With the design all but over, the team has continued the physical aspect of the project. This includes cutting the parts out and then assembling them.

_DSC0079
Programming team and Roupen meeting with Mika to provide updates on their work.

Welding member Roupen helped out the Prototype team with their labors on the flywheel construction.

_DSC0045
Roupen assisting Prototype team member Karin.

Rookie member Eden spent the time practicing welding, so he can quickly master the fine art and no longer need Roupen’s guidance at all times.

_DSC0056
Eden admiring his fine craftsmanship.

Daniel of Programming continued the logger coding. Other members John, Bhavin, and Jake conducted their own coding, but on different things. John was working on the autonomous code for the robot, and Bhavin resumed coding SnapDragon. Jake attempted to fix the battery program so the robot would be able to perform its tasks.

_DSC0025
Programming team constructing and fixing their respective codes.

Lathe member Lousaper was working under the teaching of Mr. Black. Together, she learned how to set up new tools inside of the Lathe.

_DSC0052
Lousaper wrapping her head around what Mr. Black has been teaching her.

Dustin and Nanor worked under Mr. Widholm’s guidance to set up their own tools inside of the Mill.

_DSC0054
Dustin and Nanor being mentored on how to operate the Mill.

CAD members worked together to start their presentation. Individually, Anthony K. worked on his toolbox and Claire made an intake mechanism.

_DSC0063
Anthony K. working on his toolbox.

Mikia practicing pocketing on an electronics plate using Autodesk Inventor. Sipan finalized the Fall 2015 robot update, we were all so proud of him.

_DSC0061
Sipan and Mikia working independently.

Jonna of CAM worked on the presentation while James helped out Prototype team.

_DSC0065
James doing his thing on the computer.

Over on Animation, Anthony C. and Chris brainstormed safety animation ideas. Once they figure out a proper scheme, they will set out to animate it into life.

_DSC0059
Animation team conducting research on their project.

Simulation team member Jacob continued ODE and he added drag to the football’s trajectory project. Yerine conducted research to improve their presentation, it’s setting up to look real good.

Business team had a very busy work day, Nicole wrote content for the 696 Brand Guide, and also created the cover for the guide. She was also able to vectorize the sponsor logos.  Arvin conducted research on the entrepreneurship essay and Anna hung up the canvassed shirts (with help from the other members).

_DSC0021
Anna hanging up the canvassed shirts on the business room’s wall.

Andrea continued the spreadsheet work and categorization for the light bulbs that members were selling like hot-cakes.

_DSC0023
Andrea updating her spreadsheet.

And of course, last but completely not least, our divine Leadership team. Our ever celestial President Mika was, as always, working at top notch for the team. Mika helped out CAD and Prototype team on their individual team activities. She then created a presentation to inform the team of what Presentation Day asks of them. Mika then created a team calendar for the upcoming build season.

_DSC0068
The famed and glorious President Mika consulting with Simulation team.

The team’s very own exalted Vice-President also had a full day. Alexander helped out the CAD team with their various work, then he went over to Programming and assisted Jake with his troubles. Then Alexander continued his elevator design with magnificent speed and efficiency. The team is so lucky to have a member such as him.

_DSC0073
Our beloved, prodigal Vice-President Alexander working on his elevator design.

With the sun long gone, the lab was vacated and closed around 7:00, and the individual members went home to work on their homework like the good students they are.

10/23/15 – Friday – Do or Doughnut, There Is No Try

The air vibrated with excitement when it was announced that 696 had gotten into the Ventura competition thanks to Mr. Black. We’ll be heading over during the spring break, which is my kind of idea of a proper vacation.

Business team expressing their delight when learning that the team got into the Ventura competition.
Business team expressing their delight when learning that the team got into the Ventura competition.

In other news, the light-bulb business has recommenced. For those wondering, selling power-efficient light-bulbs to raise money to go on trips, such as the Ventura one, is the main source of donation towards Robotics club. We’re all determined to sell as many as we can to help out our team.

Also, Samuel, of the Blogging (and Photography) team was given the Golden Wrench Award. Blushing a deep crimson, Samuel gracefully accepted the award from Mika.

Samuel looking quite dapper.
Samuel looking quite dapper.

Over in Business, Anna continued creating and writing the applications for both the Woodie Flowers Award and the Entrepreneurship Award. Meanwhile, Arvin outlined the future business plan and worked on his presentation.

Arvin and Anna looking over the FRC site.
Arvin and Anna looking over the FRC site.

Andrea was maintaining an excel spreadsheet for the light-bulb sales after she passed out the said light-bulbs.

Andrea working on the spreadsheets.
Andrea working on the spreadsheets.

And the hardworking Nicole finished up the brochure.

Nicole adding finishing touches to the brochure.
Nicole adding finishing touches to the brochure.

Jonna and James of CAM fixed many plates (not the kind you eat on). They also worked on their presentation.

James asking for help from Alexander.
James asking for help from Alexander.

Chris R. and Anthony C. of Animation both continued their tutorials of modelling using 3DS Max software.

Anthony C. and Chris R. modelling.
Anthony C. and Chris R. modelling.

CAD team had a very busy day. Claire and Anthony K. created intake plates, and Anthony K. continued work on his gearbox.

Anthony K. and Claire working on Autodesk.
Anthony K. and Claire working on Autodesk.

Mikia was learning how to work with autodesk and he started his own plate design. And Sipan, the leader of this group, worked on the drivetrain’s gearbox. He also kept updating the assembly for the Fall-robot.

Sipan hard at work.
Sipan concentrating hard on his work.

Dustin and Nanor, from CNC Mill, worked under Mr. Widholm to learn how to operate the Mill. Besides some confusion, the two learned much.

Dustin and Nanor learning how to operate the Mill.
Dustin and Nanor learning how to operate the Mill.

Lousaper and Arpi, from CNC Lathe, worked under Mr. Black to learn how to operate the Lathe. Besides some coolant leaks, the two did perfect.

Lousaper and Arpi operating the Lathe.
Lousaper and Arpi operating the Lathe.

The full Prototype team, Meetkumar, Lauren, Karin, and Devon, all continued prototyping the flywheel.Working together, they were able to cut out more pieces from wood slates.

Lauren and Karim drilling into wood.
Lauren and Karin drilling into wood.

Working together, they were able to cut out more pieces from wood slates.

The wood that Prototype team was cutting and drilling.
The wood that Prototype team was cutting and drilling.

Eden, of Welding, practiced welding a 16 in. box-tube using fillet welds and flat welds. He and Roupen also helped out the Prototype team with their flywheel.

Welding and Prototype team working together.
Welding and Prototype team working together.

Over on Programming, John continued his autonomous coding of the QHR program, and Daniel worked on the logger. Jake was able to reprogram the hood-slider on QHR. And Bhavin kept on coding SnapDragon from essentially scratch.

Jacob and Yerine, both on Matlab or Simulation team used Matlab to code in the football’s drag. This is part of their project, the mapping of a football’s trajectory.

Yerine and Jacob hard at work using Matlab software.
Yerine and Jacob hard at work using Matlab software.

And finally, what we’ve all been waiting for. THE LEADERS.

First we have our magnanimous President. The one, the only, Mika! She extended herself to all the teams to help out with their tasks. However, she spent a hefty time assisting the Prototype team in their endeavors.

Our two wonderful leaders putting their minds together to problem-solve issues.
Our two wonderful leaders putting their minds together to problem-solve issues.

And of course there’s also our altruistic Vice-President, Alexander! He, in his greatness, helped out CAD with all of their work and problems. Alexander also continued his own work on an elevator design on Autodesk.

Mr. Black helped out the CNC Lathe team by teaching them the operations of the Lathe.

A little over halfway through the workday, manna from heaven found its way to us. And by this, I mean we were given doughnuts. We all washed our hands before and after of course, and we exercised proper food protocol in the lab. Boy was it delicious.

Sipan enjoying a delectable doughnut. When asked if it was sweet-bread he was eating, he responded with "Sí, pan."
Sipan enjoying a delectable doughnut. When asked if it was sweet-bread he was eating, he responded with “Sí, pan.”

The lab closed around 8:15. While it was actually clean, the faint aroma of doughy goodness still lingered.

10/9/15 – Friday – Minimum Day

Once more, that time of the week had finally arrived – Friday. It’s on Fridays that we get to go to Robotics club, and this Friday was no exception. However, unlike other Fridays, this day was also a minimum day at school. This means that school ends at 12:50 instead of 3:00.

With the early ending of school, Robotics started at 1:30 and would end around 6:00. As the school didn’t offer lunch during the day, Robotics club had pizza available for any students that wanted it. Many members took this kind offer up, and enjoyed delicious pizza from the time of 12:50 until 1:30. After that, we all helped clean the lab up and set off to work.

Before getting to work, the Friday meeting took place. After the tasks were assigned, the Golden Wrench Award went to rookie-welder, Eden Morris. Blushing with gratitude, Eden graciously accepted the award with tears in his eyes.

Eden modestly showcasing his award.
Eden modestly showcasing his award.

With Fall-training in full motion, all teams were busy with their individual training and work.

On Business, Andrea and Nicole were busy setting up the shirts onthe walls, and Andrea was also being taught how to print vinyl signs. Annam teaching Andrea how to print vinyl signs, was herself printing vinyl signs for the lab. And Arvin, a possible new Business member, was working on a sample press releases and researching entrepreneur awards for the team.

IMG_2471
Anna printing out vinyl sign for lab.

Luke and Josiah of Web Design were both finishing up team interviews.

IMG_2462
Josiah conducting interviews.

Due to working separately, they were able to conduct interviews faster, quite the smart tactic for a large team like ourselves.

IMG_2449
Luke conducting interviews.

For the Media team, Armand was the only member present. He spent the day sorting files for later use.

James of CAM made G-code for the CNC to be able to pocket a one-by-two box-tube. His team rookie, Jonna, tested the G-code to check for mistakes. The two of them synchronize flawlessly such that they work like parts of a fully functional robot.

IMG_2476
Jonna and James working on the G-code.

Chris R. and Anthony C. worked harder than any other day on 3ds Max. These two members of Animation were creating characters on the software to learn how to work their software the best.

Programming team member John worked on the autonomous coding using QHR while Jake finished configuring the robots to be controlled manually by a remote. While they did this, Daniel created and worked on the logger, which would log the information from the robot. Bhavin developed Snap Dragon’s code, which is essentially all of the robot’s functions. Their mentor Dr. Clouse oversaw these operations while catching up on ChiefDelphi.com, which is the FRC website forum for updates on information regarding Robotics.

IMG_2516
Bhavin working on Snap Dragon’s code.

Roupen and Eden, members of Welding helped Prototype team with building a flywheel. This will later be used to launch basketballs.

IMG_2505
Eden searching for tools to work on flywheel with.

Meetkumar, Lauren, Karin, and Devon – all members of Prototype – spent the day designing and building a flywheel. They received help from the Welding team.

IMG_2501
Prototype and Welding team brainstorming flywheel design.

Mika, the supreme President of Robotics explained what mechanisms were and what prototype requirements were expected from the Prototype and Welding teams for their flywheel. She also consulted the 80-20 manual to locate what parts need to be ordered. And, of course, she made her rounds to check in on the sub-teams.

IMG_2460
Mika teaching Prototype and Welding teams (and Alexander) on what a flywheel is and its function.

Alexander, our equally supreme Vice-President of Robotics helped out the CAD team with their Fall-training and their drive-train designs. He also assisted Mika with the 80-20 manual and designed a flywheel for later application.

IMG_2466
Alexander assisting CAD team.

On CAD, Mikia studied Inventor software while Claire and Anthony K. designed a gearbox on Inventor. Sipan spent the time designing a drive-train on inventor.

IMG_2474
Claire and Anthony K. working on gearbox.

CNC Lathe and Mill students Dustin, Nanor, Lousaper, and Arpi learned the basics of operating the CNC Lathe under the mentorship of Mr. Black. They even got to make their own custom part using the Lathe.

 

Custom part created by CNC Lathe and Mill teams working with Mr. Black.
Custom part created by CNC Lathe and Mill teams working with Mr. Black.

Dustin says “it’s pretty neat.” One important lesson all of them will definitely take away from this experience will be to always check the coolant nozzle so it doesn’t spray the operators.

IMG_2493
Mr. Black teaching CNC Mill and Lathe teams on operating the Lathe.

Simulation member Jacob wrote a program to animate the trajectory of a football using MatLab. With help from his mentor Jim Stone, he also developed the standardized procedures for file management. He also established the goals of Simulation team.

IMG_2479
Simulation team working on MatLab.

Mr. Black spent the hours helping CNC Mill and Lathe teams. Once they moved on to other work, he went to his computer to conduct Robotics work and answering emails.

IMG_2477
Mr. Black hard at work on his computer.

Last but not least, Samuel – member of Photography and of Blogging – spent the day taking and sorting pictures and getting material for this very blog you’re reading.

IMG_2517
Samuel Witt, lead photographer and blogger looking dashing.

The lab was closed around 7:00, another successful day that should make all members of Robotics proud.

10/2/15 – Friday – Pizza Surprise

Another day, another dollar. Of course, just working alongside our fellow team members at Team 696 is more than enough payment. And thus, another successful Friday passed us by, full of achievement and bonding.

Daniel, Bhavin, John, and Jake Z. of the Programming team worked hard at rewriting code for autonomous control of the robot. They also fully reconfigured QHR to work on an Xbox controller. As always, their mentors kept an eye on what they were up to, making sure everything was done properly.

Over on the Welding team, newcomer Eden practiced fillet and flat welding under the tutorship of Roupen. They also welded a one-by-one 1/8th boxtube to another one-by-one 1/8th boxtube.

Business member Anna designed and printed signs for the lab, and later placed them in their appropriate places. Meanwhile, Nicole researched FRC awards and helped Andrea continue setting up the t-shirts on canvasses for later redecoration of the business room. They also continued the redesigning of Team 696’s brochure and got quotes from students to display in said brochure.

IMG_20151002_172603
Anna creating lab sign with the utmost care.

Media team, Chris H. and Armand, finished their Thank You videos. They then proceeded to prepare their work spaces for the next meeting.

Jonna and James, of CAM, utilized the plasma-cutter to make plates. Preparing the plasma-cutter and creating the plates would take up the rest of their time.

Mika, our wonderful President, oversaw all operations of the team. At the beginning-meeting, she awarded Daniel with the Golden Wrench Award. She spent the rest of her time assisting sub-teams in their tasks.

Alexander, our equally wonderful Vice-President spent his time helping CAD in their work.

IMG_20151002_170431
Alexander helping the CAD team.

Animation team explored 3DS-Max. Anthony C. and Chris R. also used a snow generator for their programs.

Yerine, Jacob, and Arvin continued their MATLAB review and practice on the Simulation team. They were also given the intro to their later project – mapping the trajectory of a football.

Luke, of Web, continued interviewing team members. His tactics are superb, and it can be said that the whole operation is Luke-ing good.

CAD member and only person on 3D Printing, Mikia printed two puzzles of South America. Mikia also studied CAD software.

IMG_20151002_171955
Mikia using a 3D printer with nimble hands.

The other CAD members, Sipan, Claire, and Anthony K. performed the fall-training routines. They also setup Vaults servers for the whole team (very important), and finished packing the 3D printed robot parts.

IMG_20151002_170445
Sipan setting up Vault accounts.

Prototype members Meetkumar, Lauren, Devon, and Karin practiced drilling, tapping, and filing by drilling, tapping, and filing.

The Lathe team was able to practice using the CNC lathe machinery up close. Lousaper and Arpi performed hands-on practice under the supervision of Mr. Black.

And of course, let’s not forget Blogging and Photography. Samuel Witt spent the day sorting photos and getting material for his blog. He also took beautiful shots of certain members to give to Business team to go with their quotes.

The day as a whole was pretty normal, except for the surprise snack. Samuel’s mother had purchased pizza for the whole team, and had it delivered to the lab. After Samuel communicated this to Mr. Black, Alexander, and Mika, a space was cleared for the plates, napkins, and pizza.

Once it arrived, Samuel placed plates in a stack as well as the napkins. Per policy, the mentors went first, then the students quickly followed. All eating was done away from any computers, and everyone washed their hands afterwards. Everything happened within thirty minutes, and then it was cleaned up and everyone returned to work.

The lab was closed shortly after 7:00.